Insertos de fresado APMT, RCMT, RCKT, SEMN/SEEN para acabado a alta velocidad y torneado-fresado de acero e inoxidable.
12 Modelos · 5 Serie
| Group | Workpiece | HB | Grade | Vc (m/min) | f (mm/z) | ap (mm) |
|---|---|---|---|---|---|---|
| P | 钢 Steel | <180 | KT20 | 200-360 | 0.1-0.3 | |
| P | 钢 Steel | 180-280 | KT20 | 180-350 | 0.1-0.3 | |
| P | 钢 Steel | 280-350 | KT20 | 170-340 | 0.1-0.3 | |
| M | 不锈钢 Stainless Steel | <270 | KT20 | 110-270 | 0.1-0.3 | |
| K | 铸铁 Cast Iron | |||||
| N | 铝合金 Aluminium Alloys | KT20 | 300 | 0.1-0.4 | ||
| H | 高硬钢 Hardness |
| Group | Workpiece | HB | Grade | Vc (m/min) | f (mm/z) | ap (mm) |
|---|---|---|---|---|---|---|
| P | 钢 Steel | <180 | KT20 | 200-360 | 0.1-0.45 | |
| P | 钢 Steel | 180-280 | KT20 | 180-350 | 0.1-0.45 | |
| P | 钢 Steel | 280-350 | KT20 | 170-340 | 0.1-0.45 | |
| M | 不锈钢 Stainless Steel | <270 | KT20 | 110-270 | 0.1-0.45 | |
| K | 铸铁 Cast Iron | |||||
| N | 铝合金 Aluminium Alloys | |||||
| H | 高硬钢 Hardness |
| Group | Workpiece | HB | Grade | Vc (m/min) | f (mm/z) | ap (mm) |
|---|---|---|---|---|---|---|
| P | 钢 Steel | <180 | KT20 | 140-250 | 0.04-0.15 | |
| P | 钢 Steel | 180-280 | KT20 | 130-250 | 0.04-0.15 | |
| P | 钢 Steel | 280-350 | KT20 | 110-240 | 0.04-0.15 | |
| M | 不锈钢 Stainless Steel | <270 | KT20 | 80-190 | 0.04-0.15 | |
| K | 铸铁 Cast Iron | |||||
| N | 铝合金 Aluminium Alloys | |||||
| H | 高硬钢 Hardness | KT20 | 70-120 |
¿Necesita ayuda para elegir?
Envíenos el material de la pieza, la dureza y la máquina — nuestros ingenieros le recomendarán el grado y los datos de corte iniciales.
Contactar